JVC IP Control

Here is the current JVC IP control command set:

You can convert these into pronto codes with our online tool

Full Command List:
01 UP Button
02 DOWN Button
34 RIGHT Button Moves the cursor to right/+ in adjustment gauge 
36 LEFT Button Moves the cursor to left/- in adjustment gauge 
2F OK Button
03 BACK Button Undisplays message, adjustment gause, menu 

05 Powers on 
06 Powers off / Stand By 

08 Switches Input Port 
1D Switches Hide ON/OFF 
20 Displays adjustment bar of Iris setting Gauge

23 Switches Anamorphic A 
2B Switches Anamorphic B 
33 Switches Anamorphic C 
45 Switches Anamorphic D 
24 Switches Anamorphic off 
27 Switches Aspect to Zoom 
2E Shows / Hides Menu
30 Displays adjustment  of Lens control/Switches setting of lens(focus/zoom/shift) 

47 Clear Motion Drive(Off)
48 Clear Motion Drive(Low) 
49 Clear Motion Drive(High) 
4A Clear Motion Drive(Inverse Telecine) 

68 Switches to "CINEMA" in Picture Mode 
69 Switches to "FILM" in Picture Mode 
6A Switches to "NATURAL" in Picture Mode 
6C Switches to "USER1" in Picture Mode 
6D Switches to "USER2" in Picture Mode 
6E Switches to "USER3" in Picture Mode 
CA Switches to "USER4" in Picture Mode or TV 
CB Switches to "USER5" in Picture Mode or Game
CC Switches to "USER6" in Picture Mode 
6F Switches to "THX" in Picture Mode 

70 Switches to HDMI 1 
71 Switches to HDMI 2 

72 PIC.ADJ. Menu
73 Displays Advanced page of Menu
74 Displays information page of Menu

75 Switches Gamma mode 
76 Switches Color Temp mode 
88 Switches "Color Profile" in the OSD  order (It is different depending on the Picture Mode.)
8A Change of "Clear Motion Drive" settings 

AE Aspect(Auto)
AF Aspect(Native)

C5 Change of "Anarmorphic mode" 

D0 HIDE(On) - Switches Hide to On 
D1 HIDE(Off) - Switches Hide to Off 

D2 Solenoid(Normal) - Switches Solenoid to Normal (no input only on test pattern)
D3 Solenoid(Wide) - Switches Solenoid to Wide (no input only on test pattern)
 
D4 Setting Memory - Open the list of "Setting Memory" 
D5 3D Setting - Open "3D Setting" OSD menu
D6 3D Format - Change of "3D format" menu
D7 User - Change of "User picture mode"
F0 MPC - Displays "MPC Level" Menu 
F4 Picture Mode - Goes to "Picture Mode" Tab in User Menu 
F5 Gamma Settings - Goes to "Gamma" Tab in User Menu
F7 Name Edit - - ? ? ? Goes to "Name Edit" Tab in User Menu
 
D8 Installation MODE1  - Change of "Installation mode" or "lens memory" to 1
D9 Installation MODE2  - Change of "Installation mode" or "lens memory" to 2
DA Installation MODE3  - Change of "Installation mode" or "lens memory" to 3
E5 Installation MODE4  - Change of "Installation mode" or "lens memory" to 4 
E6 Installation MODE5  - Change of "Installation mode" or "lens memory" to 5
E7 Installation MODE6  - Change of "Installation mode" or "lens memory" to 6
E8 Installation MODE7  - Change of "Installation mode" or "lens memory" to 7
E9 Installation MODE8  - Change of "Installation mode" or "lens memory" to 8
EA Installation MODE9  - Change of "Installation mode" or "lens memory" to 9
EB Installation MODE10 - Change of "Installation mode" or "lens memory" to 10

DB 3D Format (Auto) - Switches 3D format to Auto 
DC 3D Format (Side by Side) - Switches 3D format to Side by Side 
DD 3D Format (Top and Bottom) - Switches 3D format to Top and Bottom 
DE 3D Format (OFF: 2D) - Display by 2D format compulsorily 

E1 HLG - Switches to "HLG" in Picture Mode 
ED HDR10 - Switches to "HDR10" in Picture Mode 

F8 Low Latency - (on/off toggle) Change of "Low Latency mode"